Sign up for our newsletter
Subscribe to our emails
Speciality Micrometers
Insize Insize 1µ Graduation Outside Micrometer
Graduation 0.01mm Ratchet stop Graduations on two sides Carbide measuring faces Meet DIN863-1
Insize Insize Blade Micrometer
Meet DIN863-3 Measure the groove diameter of shafts and keyways Graduation 0.01mm Non-rotating spindle Ratchet stop Supplied with setting standards (except 0-25mm)
Insize Insize Caliper Type Micrometer
Graduation 0.01mm Non-rotating spindle Ratchet stop Carbide measuring faces Supplied with setting standards (except 0-25mm)
Insize Insize Crimp Height Micrometer
Measure the height of crimp contact Graduation 0.01mm Ratchet stop Supplied with setting standards (except 0-25mm)
Insize Insize Cylindrical Anvil Tube Micrometers
Measure wall thickness of tubes Graduation 0.01mm Ratchet stop Carbide spindle tip Supplied with setting standards (except 0-25mm)
Insize Insize Disk Micrometers
Measure root tangent length of gear Graduation 0.01mm Ratchet stop Supplied with setting standards
Insize Insize Gear Tooth Micrometers
Meet DIN863-3 Measure over-pin diameter of gears Graduation 0.01mm Ratchet stop Supplied with setting standards (except 0-25mm) Optional accessary: ball tips (code 7391)
Insize Insize Groove Micrometer
Measure width of grooves inside bores Graduation 0.01mm Two graduations for inside and outside measurements Non-rotating spindle
Insize Insize High Precision Digital Micrometers/Snap Gages
Absolute encoder, the original data remains after power off Adjustable resolution: 0.0002mm/0.00001" 0.001mm/0.00005" 0.01mm/0.0005" One turn of sleeve makes 5mm spindle feed Measurement accuracy is not affected by the use of sleeve Press the fork, the spindle retracts 3mm Linear ball bearings for ten million times use Carbide spindle and anvil Measuring force 7-10N Customizable measuring force range 2-12N Attention: small measuring force will reduce the dustproof and waterproof level Button function: data output, tolerance, data preset, data hold, measuring direction change, max./min./TIR, power off time, on/off, zero, mm/inch, adjust resolution Supplied with gage blocks for zero setting (except 0-25mm/0-1") Power: rechargeable battery,for 24 hours continuous working
Insize Insize Indicating Micrometer
Meet DIN863-3 Micrometer head graduation: 0.002mm Dial indicator: range ±0.04mm, graduation 0.001mm, accuracy 0.001mm Carbide measuring faces Optional accessory: gage blocks grade 0 (4101-A series), for zero setting
Insize Insize Jaw Type Micrometer
Graduation 0.01mm Non-rotating spindle Ratchet stop Supplied with setting standards (except 0-25mm)
Insize Insize Point Micrometers
Measure the web thickness of drills, small grooves and keyways Graduation 0.01mm Ratchet stop Carbide tips Supplied with setting standards (except 0-25mm)
Insize Insize Sheet Metal Micrometers
Meet DIN863-3 Measure thickness of sheet metal, paper, plastic and rubber parts Graduation 0.01mm Ratchet stop Carbide measuring faces
Insize Insize Spherical Anvil Tube Micrometer
Meet DIN863-3 Measure wall thickness of tubes Graduation 0.01mm Ratchet stop Carbide measuring faces Supplied with setting standards (except 0-25mm)
Insize Insize Spline Micrometer
Meet DIN863-3 Measure splined shafts, slots and keyways Graduation 0.01mm Ratchet stop Carbide measuring faces Supplied with setting standards (except 0-25mm)
Insize Insize Wire Micrometer
Meet DIN863-3 Measure diameter of wires and small balls Graduation 0.01mm Ratchet stop Carbide measuring faces