Deals under ₹999
-
MRW by Widia MRW Turning Inserts/CCMT060208MFT2/MR2500P - Box of 10
�� MRW CCMT060208MFT2/MR2500P Turning Inserts Experience superior machining performance with MRW CCMT060208MFT2/MR2500P turning inserts, engineered for exceptional precision and durability. These high-quality inserts are specifically designed for efficient machining of steel and cast iron, delivering exceptional results with minimal effort. �� Key Features: Sharp Cutting Edges: Designed for smooth and aggressive cutting action, minimizing vibration and improving surface finish. Robust Construction: Manufactured from high-quality carbide for exceptional wear resistance and long tool life. Precise Geometry: Optimized cutting geometry for optimal chip flow and reduced cutting forces. Suitable for Various Applications: Ideal for a wide range of turning operations, including facing, turning, and grooving. Benefits: Enhanced Machining Accuracy: Achieve precise dimensions and superior surface finishes with minimal effort. Increased Productivity: Experience faster machining cycles and improved material removal rates. Reduced Downtime: Minimize tool wear and breakage, leading to less downtime and increased efficiency. Improved Tool Life: Durable construction ensures long tool life, reducing the need for frequent replacements.
-
-
Armatech Associates Crystal Magnetic Rack
Crystal brand Permanent Magnetic Racks are useful in tool room, workshops, paint shop, machine shops, assembly, garages, to keep the hand tools such as spanners, screw drivers, calipers, files, cutting tools, etc. In a systematic manner. It helps the user for easy handling & storage. They are available in different lengths. Magnetic Racks are totally protected from rust and corrosion.These racks can be easily mounted.“Crystal†magnetic racks make the best possible use of permanent magnet material in the solution of many lifting and holding problems, as all available magnetic flux from a small number of magnets is concentrated in the two mild steel pole pieces.Details: Sr. No. Cat No. DimensionsL XH X W 1. AA-3161 150 X 25 X 30 mm 2. AA-3162 225 X 25 X 30 mm
-
CP CP Countersink Tools (3 Flute)
3 Flute, Long Shank Countersinks for hole/slot/corner deburring/ chamfering. For hole size from 3 to 12 mm Pack Qty : 1 Wt : 60 gms
-
CP CP DT-SD (3-in-1) Set
Unique tool which holds 3 sizes of blades viz. 2.6 mm Ø, 3.2 mm Ø & 6 mm Ø blades, in a one handle. Handle has auto release system for easy change of blades & holders. All blades & holders can be stored from back side of the handle. Includes : 'R-SD' Handle, SD-C & SD-P Holder and 7 Blades - R-15(S), C-10, C-20, C-30, P-1, P-2, & P-3. Pack Qty : 1 Wt. : 88 gms
-
Armatech Associates Crystal Universal Surface Gauges
The base is made from case — hardened steel, ground on the bottom and at one end.  There is a depression in each side for the thumb and fingers and the groove in the base adapts it for use on cylindrical as well as flat surfaces.  There are two gauge pins frictionally held, which can be pushed down and used against the end of a surface plate on a T- slot for linear work.  The fine adjustment feature makes it possible to obtain quick and accurate settings.  The spindle which passes through rotating head or lower sleeve can be set above or below the base. The hardened and ground scriber can be set at any position on the spindle which in turn can be set at any angle.
-
-
-
Trumax Trumax Dead Center (Carbide Tipped Point)
Tungsten Carbide Tip brazed in front for high wear resistance. Shank made from Alloy Steel 20MnCr5 and case hardened for 50-53 HRc. Precision ground. Tip runout within 0.015 mm w.r.t. Taper. Standard Point Angle 60�� Broadly confirms to IS : 2534 - 1963 (Equivalent to DIN : 806-807). �� Shank Taper L mm L1 mm �� D mm D1 mm �� d mm C.T. h1 mm MT - 1 53.5 26.5 12.2 12.065 5 3.20 MT - 2 64.0 36.0 18.0 17.780 8 5.50 MT - 3 81.0 44.0 24.1 23.825 11 7.00 MT - 4 102.5 57.5 31.6 31.267 14 8.90 MT - 5 129.5 70.5 44.7 44.399 18 11.00 MT - 6 182.0 88.0 63.8 63.348 18 11.10
-
Trumax Trumax Dead Center (Plain Male Point)
Small size Taper upto MT-4 made from Bearing Steel EN-31 and through hardened to 58-60 HRc. Big size tapers from MT-5 upwards made from 20MnCr5 and Case Hardened to 58-60 HRc. Broadly confirms to IS : 2289 - 1976 (Equivalent to DIN: 806-1961 / ISO : 298) Precision ground. Tip runout within 0.015 mm w.r.t. Taper. Standard Point Angle 60�� (other Angles like 75�� / 90�� etc. against request) �� Shank Taper L mm L1 mm L2 mm ��D mm D1 mm h mm h1 mm A1 mm B1 mm MT - 1 53.5 26.5 21.5 12.2 12.065 2.0 3.0 5.5 2.5 MT - 2 64.0 36.0 29.0 18.0 17.780 2.6 3.5 8.0 4.0 MT - 3 81.0 44.0 36.0 24.1 23.825 3.5 4.5 9.0 5.0 MT - 4 102.5 57.5 48.0 31.6 31.267 5.2 5.5 11.0 6.0 MT - 5 129.5 70.5 58.5 44.7 44.399 11.7 6.5 14.0 8.0 MT - 6 182.0 88.0 73.0 63.8 63.348 10.1 8.5 17.0 11.0 MT - 7 254 121 - 83.550 83.058 - - - -
-
Armatech Associates Crystal Pot Magnets
Pot Magnets: “CRYSTAL†Pot Magnets are compact units embodying powerful “Alnico†magnets assembled in mild steel pot by aluminum retaining and insulating rings designed for magnetic holding and lifting applications of all sorts. They can be readily inserted into other assemblies and the mild steel pot be easily machined to suit individual requirements. Available in Neodymium Pot Magnet, Hook Magnet, Shallow Pot Magnet, Deep Pot Magnet, Countersunk Magnet and in four sizes. Supplied complete with plated keeper. Special sizes can also be manufactured. Specifications: Sr. No. Cat. No. Diameter(OD) Height(H) Threading Depth of Threading(D) Magnetic Pullkg 1 AA-1921 18 mm 16 mm M 5 5-6mm 1.8 2 AA-1922 22 mm 20 mm M 6 5-6mm 2.8 3 AA-1923 27 mm 25 mm M 6 5-6mm 6.5 Â
You have seen 263 out of 263 products
