
Clamps
-
Steelsmith Medium Duty Adjustable Latch
-
-
-
Steelsmith Toggle Pliers-TP Series
-
-
-
Steelsmith Horizontal Hold Down Action H-215 Series Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith PAH TRIG Clamps
-
Steelsmith Pull Action Clamps PAH Series (385 Series)
-
-
Steelsmith Medium Duty Non-Adjustable Latch (27Series)
-
Steelsmith HTC-LH-TRIG Series Clamps
-
Steelsmith Horizontal Hold Down Action H-225 & H-235 Series Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Pull Action Clamps PA Series (325 Series)
-
Steelsmith VG Series Jaw Plier
-
-
-
-
-
-
-
Steelsmith PAH 38 TRIG Clamps
-
Steelsmith PAH 27 TRIG Clamps
-
Steelsmith HTC-PS-TRIG Series Clamps
-
Steelsmith HTC-Series Medium/Heavy Duty-Package Size Clamps, Flanged Base
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith HTC-Series Heavy Duty-Package Size Clamps, Flanged Base
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith HTC-Series Medium Duty-Package Size Clamps, Flanged Base
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith HTC-Series Medium Duty Clamps - Flat Handle
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith HTC-Series Medium Duty-Package Size Clamps, Straight Base
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith HTC-Series Medium Duty Clamps - Low Height
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith HTC-Series Medium/Heavy Duty Clamps - Low Height
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Horizontal Hold Down Action H-213, 217 Series Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Horizontal Hold Down Action H-227, 237, 245 Series Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith HTC-U-TRIG Series Clamps
-
Steelsmith Horizontal Hold Down Action- H International Range Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Vertical Hold Down Action VTC-247 & VTC-267 Series Clamps
Vertical Hold Down Action With Additional Locking Mechanism(VTC): As the name implies clamps of this type hold the work piece with a downward clamping action. These clamps are manufactured with a holding capacity upto 3000kgs. The Clamping Exhibits a minimum of 90 deg opening angle giving full clearance for loading& unloading of workpiece. Clamping arm can be solid bar, U shaped or fixed hole to suit individual requirements. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
