Countersink Set- Revolving (48032) Revolving type Countersink setIncludes :CS-20 Countersinks with CS-Revolving Handle.Pack Qty : 1Wt : 236 gms  

Read more less

The Noga Countersink Tools/Reversible (R) Type utilizes an innovative Reversible design for efficient and precise countersinking.   COUNTERSINK - NG3100 The standard tool for countersinking. Useful For Chamfering Deep Holes NG-3 HANDLE - NG3000 NogaGrip 3 Holds all Blade Holders Spare blades are kept inside back cap. Designed for maximum comfort in your hand.  

Read more less

Save money and explore a wide range of capabilities with Noga Deburring Kits. These kits are designed to provide cost savings while offering a variety of options for deburring needs.

Read more less

SCR-3(75mm) (72750) Triangular 3 mm. A/F Scraper of 75 mm. length. Blade Material : HSS (M2 grade).Pack Qty. : 1Wt : 6 gms. SCR-6(2) Combo (74060) Double ended scraper of 6 mm Ø.Tringular Scraper on one side & Internal Scraper on another side.Blade Material : HSS (M2 grade).Pack Qty. : 1Wt : 16 gms. SCR-345 (72450) 3.2 mm Ø, 45 degree internal scraper.Blade Material : HSS (M2 grade).Pack Qty. : 1Wt : 6 gms. SCR-8 Blade (75080) Triangular 8 mm. A/F Scraper.Blade Material : HSS (M2 grade).Pack Qty. : 1Wt : 20 gms. HS-80 Scraper (76080) 4.2 mm Triangular Hollow Scraper.Double ended. Length 80 mm.Blade Material : CR115.Pack Qty : 1.Wt : 18 gms. HS-120 Scraper (76120) 7.4 mm Triangular Hollow Scraper.Double ended. Length 120 mm.Blade Material : CR115.Pack Qty : 1.Wt : 18 gms.

Read more less

Item Code Handle Type Blade Length Handle Dia End Cap Dia Wt. ET-2 Metallic handle with Soft Grip & Ball End Cap C-10 130mm 12mm 18mm 58gms CG-2 Poly Acetal Body Handle with Soft Grip & Ball End Cap. Blade Spring Loaded collet  Action for Blade Housing C-10 122mm 23mm 18mm 48gms DT-3(New) Classical Design Poly Acetal Handle with ball catch lock for blade holding & space for blade storage C10, C-20, C-15 145mm 23mm 18mm 48gms DT-3(M)-SD Poly Acetal Body D-SD handle with ball end cap & Metallic blade holder + space for blade storage C-10, C-20, C-15 143mm 23.7mm 24mm 59gms DT-5-SD Poly Acetal Body  T-SD with telescopic holder DT(C) & Ball end cap with 5 nos blade C-10, C-20, C-30,C-15, C-10(C) 163mm, 230 max 23.7mm 24mm 105gms

Read more less

CS-12 (48120) 2 Flute Countersinks for hole deburring / Chamferring.For hole size from 3 to 12 mm.Pack Qty : 1Wt : 24 gms CS-20 (48200) 2 Flute Countersinks for hole deburring / Chamferring.For hole size from 3 to 19 mm.Pack Qty : 1Wt : 28 gms. CS-30 (48300) 2 Flute Countersinks for hole deburring / Chamferring.For hole size from 3 to 29 mm.Pack Qty : 1Wt : 56 gms. Countersink Set- Revolving (48032) Revolving type Countersink setIncludes : CS-12, CS-20 and CS-30 Coutersinks with CS-Revolving Handle.Pack Qty : 1Wt : 236 gms

Read more less

SCR-3 (72034) 3 mm triangular HSS Scraper for surface finishing / scraping work.Fix mounted in Al. Hex Handle.Pack Qty : 1Wt. : 36 gms SCR-8 (75084) 8 mm triangular heavy-duty HSS Scraper for surface finishing / scraping work.Replaceable in Al. Hex Handle.Pack Qty : 1Wt. : 54 gms SCR-8-SD (74084) 8 mm triangular heavy-duty HSS Scraper for surface finishing / scraping work.Replaceable in Ergonomically designed Polyacetal Body Handle.Pack Qty : 1Wt. : 88 gms  

Read more less

Simple, Economical Deburring tool. Al. 3/8" A/F Hex body, Powder coated handle with C-10 blade. Blade can be replaced. Pack Qty : 1 Wt. : 44 gms

Read more less

Double ended Deburring blade for single or 2-edge deburring of Sheets / Ribs. Deburrs both edges of sheet/rib of up to 4 mm, thick from one side Single edge deburring from other side. Blade Material : HSS (M2 grade). Pack Qty. : 1 Wt : 18 gms

Read more less

Noga Heavy Duty Countersinks Patented External contersinks allows the user continuous rotation for fast and accurate chamfering of external shafts.   APPLICATION Holes External Shaft

Read more less

RotoDrive Cranked Countersinks which allows the user to chamfer holes, deep holes and continuous rotation for fast and accurate chamfering. If a hole is drilled into a work piece, usually a rough edge will appear around the top of the hole. Noga countersinks can remove these rough ridges and put a chamfer between the hole and the surface into which the hole was drilled. Noga Countersinks can also create a deeper recess into a hole, in order to prevent a flat head screw from projecting over the surrounding surface. Noga Countersinks are hand-operated tools normally used for producing a small chamfer, but may also be gripped in a drill press to create deeper recesses. Noga Countersinks consist of three parts: A blade of high speed steel, a holder, and a handle. The Noga Countersinks are used like a screw-driver, pressed onto the hole, and rotated clockwise. However, another method to perform the rotation is offered with our Noga Countersinks Rotodrive system. In this case the blade-holder has the form of a crank, which enables the user to perform continuous rotations. With the Rotodrive system, Noga Countersinks also offers External Countersinks, with which rough edges can be chamfered on the outside of tubes and round bars. For external and internal light chamfering, Noga makes Reversible Countersinks. If a cross hole was drilled into a tube, this tool can be inserted into the hole, then a blade can swivel out to deburr the inside break-through, by rotating the tool clockwise and anticlockwise. Contrary to other Noga countersinks, this tool can create good chamfers also on curved surfaces, because its cutting edges will follow exactly the contour of the hole. As well as on the inside of cross holes, they can also chamfer the outside burrs. APPLICATION Holes External Shaft

Read more less

Introducing Noga patented REVERSIBLE COUNTERSINKS range for working on both back and front sides of holes. APPLICATION Holes Pipe Cross Holes

Read more less

Noga Scrapers & Blades offer versatile scraping, trimming, and deburring blades for all your precision cutting needs

Read more less

RotoDrive Cranked Countersinks which allows the user to chamfer holes, deep holes and continuous rotation for fast and accurate chamfering.   If a hole is drilled into a work piece, usually a rough edge will appear around the top of the hole. Noga countersinks can remove these rough ridges and put a chamfer between the hole and the surface into which the hole was drilled. Noga Countersinks can also create a deeper recess into a hole, in order to prevent a flat head screw from projecting over the surrounding surface. Noga Countersinks are hand-operated tools normally used for producing a small chamfer, but may also be gripped in a drill press to create deeper recesses. Noga Countersinks consist of three parts: A blade of high speed steel, a holder, and a handle. The Noga Countersinks are used like a screw-driver, pressed onto the hole, and rotated clockwise. However, another method to perform the rotation is offered with our Noga Countersinks Rotodrive system. In this case the blade-holder has the form of a crank, which enables the user to perform continuous rotations. With the Rotodrive system, Noga Countersinks also offers External Countersinks, with which rough edges can be chamfered on the outside of tubes and round bars. For external and internal light chamfering, Noga makes Reversible Countersinks. If a cross hole was drilled into a tube, this tool can be inserted into the hole, then a blade can swivel out to deburr the inside break-through, by rotating the tool clockwise and anticlockwise. Contrary to other Noga countersinks, this tool can create good chamfers also on curved surfaces, because its cutting edges will follow exactly the contour of the hole. As well as on the inside of cross holes, they can also chamfer the outside burrs.   APPLICATION Holes External Shaft

Read more less

Most Comprehensive Kit for heavy & extra-heavy duty deburring, Double edge deburring of Key-way & Sheet, Countersink tool, Ceramic tool & Scrapers. Includes : 5 Handles - 'D-SD', 'T-SD', 'R-SD', 'SD-1' & Ratchet Handle CHS-R(S), 21 Nos. 3.2 mm Ø swivel blades - 5 pcs. Each of C-10 & C-20 and 2 pcs. each of C-30, C-101, C-10©, C-20©, C-15 & 1 pc. of C-60 blades; 5 Nos. 6 mm Ø blades - 2 pcs. of R-10(S) & 3 pcs. of R-15(S), 2 Nos. Scraper-SCR-3(75mm) & SCR-6(2) Combo, Sheet/Rib Deburring tool V-2 & V-4 with telescopic holder VT, Key-wey/slot. Deburring Blades KW-16 with telescopic holder KW, DT(C) telescopic holder. CS-20 Countersink tool & C-1 Ceramic Blade. Pack Qty : 1 Wt : 1284 gms

Read more less

Comprehensive Kit for Deburring, Double edge deburring of Key-way, Sheet, Countersink tool & Scraper. Includes : 'T-SD' (2 nos.) & DT Handle, DT (P) & KW Holder, Scraper SCR-8, Countersink tool CS-20 and CS long Holder, Deburring Blades - 2 each of P-1, P-2, 5 pcs. of C-10 & 1 pc. each of C-20, C-30, C-10©, C-15 & C-101, Key-way/slot. Deburring Blades KW-9 & KW-16, Sheet/Rib Deburring V-4 Pack Qty : 1 Wt : 606 gms

Read more less

3 Flute, Long Shank Countersinks for hole/slot/corner deburring/ chamfering. For hole size from 3 to 12 mm Pack Qty : 1 Wt : 60 gms

Read more less

Unique tool which holds 3 sizes of blades viz. 2.6 mm Ø, 3.2 mm Ø & 6 mm Ø blades, in a one handle. Handle has auto release system for easy change of blades & holders. All blades & holders can be stored from back side of the handle. Includes : 'R-SD' Handle, SD-C & SD-P Holder and 7 Blades - R-15(S), C-10, C-20, C-30, P-1, P-2, & P-3. Pack Qty : 1 Wt. : 88 gms

Read more less

Simple, Economical Deburring tool. Al. 8 mm A/F Hex body Powder coated handle with Pocket clip & C-10 blade. Blade cannot be replaced. Pack Qty : 2 Wt : 72 gms

Read more less

2.6 mm ,3.2mm , 6mm Ø blade for light to Extra heavy duty application for material forming continuous chips such as Steel, Al., Copper, Zinc, Plastics, etc. Blade Material : HSS (M2 grade) Pack Qty : 10 No's Until & Unless Mentioned Qty next to item code Wt : 18 gms

Read more less

ET-1 Economical Comfort Grip Deburring toolMetallic holder for 2.6 mm Ø blades, with soft grip sleeve & comfortable ball end hand restBlade can be replaced.Includes : ET-1 Handle with P-1 BladePack Qty : 1Wt : 45 gms  

Read more less

Noga Deburring Sets, Get a Deburring Holder Free of Cost with every 20 Deburring blades !!!

Read more less

NogaGrip-3 holds all blades holders. Spare blades are kept inside back cap.Designed for maximum comfort in your hand. NogaGrip-1 holds all S blades(3.2mm). Spare blades are kept inside back cap. Designed for maximum comfort in your hand.

Read more less

Key-way / slot Deburring Blade for simultaneous deburring of both edges of slot or key-way up to 9 mm. Four cutting edges - 2 for std.depth of slot/key-wey & 2 for shallow depth. Cutting edges on 2 sides. Blade Material : HSS (M2 grade). Pack Qty. : 1 Wt : 1.25 gms

Read more less

2.6 mm ,3.2mm , 6mm Ø blade for light to Extra heavy duty application for material forming continuous chips such as Steel, Al., Copper, Zinc, Plastics, etc. Blade Material : HSS (M2 grade) Pack Qty : 10 No's Until & Unless Mentioned Qty next to item code Wt : 18 gms

Read more less

Ceramic Blade for Edge cutting of hardened components. De-flashing & Scraping of plastic components. Replaceable Ceramic Blade Pack Qty : 1 Wt : 10 gms

Read more less

V' Shaped Sheet / Rib Deburrer VDT-SD (34094) V' Shaped Sheet / Rib Deburrer for simultaneous deburring of both edges of sheet / Rib upto 12 mm width. Unique Tool - has 4 nos 'V' shaped edges - 2 nos for 1 to 12 mm width range & 2 nos for 0 to 4 mm. width range. Ergonomically designed Polyacetal Body handle with special collet to hold plain surface holder & blade Includes : 'T-SD' Handle, Telescopic Holder VT & V-4 Blade Pack Qty : 1 Wt. : 108 gms  

Read more less

 Sheet/Rib Deburring Set SDT (34084) For simultaneous deburring of both edges of sheet / Rib up to 12 mm width. Ergonomically designed Polyacetal Body Handle with Metallic Blade holder, Hand guard & blades. Cutting edge along the full circle on 2 sides. Includes : Polyacetal Handle, Blade Holder, Hand Guard & 2 Nos. S-12 blades. Pack Qty : 1 Wt. : 178 gms

Read more less

CP Key-way/Slot Deburrer tools, KWS-SD(34074) For simultaneous deburring of both edges of slot or key-way up to 9 mm with KW-9 & up to 16 mm with KW-16 blade. Ergonomically designed Polyacetal Body handle with special collet to hold plain surface holder & 2 blades. Four cutting edges - 2 for std. depth of slot/key-way& 2 for shallow depth. Cutting edges on 2 sides. Includes : 'T-SD' Handle, Telescopic holder KW, Blades KW-9 & KW-16 Pack Qty : 1 Weight : 110 gms

Read more less