Sign up for our newsletter
Subscribe to our emails
Steelsmith Collection
-
Steelsmith HTC TRIG Clamps
-
Steelsmith HTC-LH-TRIG Series Clamps
-
Steelsmith HTC-PS-TRIG Series Clamps
-
Steelsmith HTC-U-TRIG Series Clamps
-
-
Steelsmith Medium Duty Adjustable Latch
-
-
-
Steelsmith Medium Duty Non-Adjustable Latch (27Series)
-
-
-
-
-
-
-
Steelsmith PAH 27 TRIG Clamps
-
Steelsmith PAH 38 TRIG Clamps
-
Steelsmith Steelsmith Front Mounting Straight Line Action Clamps
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith H-Series Medium Duty Clamps-Flanged Base-2000,3000 Series
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith H-Series Medium Duty Clamps-Flanged Base-4000,5000 Series
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith H-Series Medium Duty Clamps-Front Mounting Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith H-Series Miniature Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith H-Series Miniature Clamps (205,206 Series) Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
-
-
-
-
Steelsmith Steelsmith Horizontal Hold Down Action H-213, 217 Series Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith Horizontal Hold Down Action H-215 Series Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith Horizontal Hold Down Action H-225 & H-235 Series Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith Horizontal Hold Down Action H-227, 237, 245 Series Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith Horizontal Hold Down Action- H International Range Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith HTC-Series Medium/Heavy Duty Clamps-Flanged Base
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith HTC-Series Heavy Duty-Package Size Clamps, Flanged Base
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith HTC-Series Medium Duty Clamps - Low Height
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith HTC-Series Medium Duty Clamps
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
You have seen 36 out of 63 products