Clamps
-
-
-
-
Steelsmith HTC TRIG Clamps
-
Armatech Associates Hardened & Ground 'V’ Blocks With Clamps - Series AA-171
V’ Blocks are Hardened & Ground to 55 HRC + 2 HRC. The top ’V’ and bottom ’V’ are parallel within + 3 micron and it’s squareness to the end faces and height variations to the ’V’ Block in a pair is within + 3 micron. Supplied with Clamp for holding job. Hold square & Round work.
-
Steelsmith Steelsmith Horizontal Hold Down Action- H International Range Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith HTC-U-TRIG Series Clamps
-
Steelsmith Steelsmith Horizontal Hold Down Action H-227, 237, 245 Series Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith HTC-Series Medium/Heavy Duty Clamps - Low Height
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith HTC-Series Medium Duty-Package Size Clamps, Flanged Base
Steelsmith HTC-Series Medium Duty Package Size Clamps with Flanged Base - Professional Industrial Clamping Solutions The Steelsmith HTC-Series Medium Duty Package Size Clamps with Flanged Base represent the perfect fusion of compact design and industrial-strength performance. These professionally engineered straight line action toggle clamps feature Steelsmith's signature quality construction combined with a convenient flanged base mounting system, making them ideal for package-sized applications where secure mounting and reliable clamping are essential. Key Features:Package Size Design: Compact dimensions optimized for space-efficient installationsFlanged Base Mounting: Secure mounting system with pre-drilled holes for easy installationStraight Line Action: Push/pull toggle mechanism provides direct linear force applicationMedium Duty Rating: Optimal clamping force for demanding industrial applicationsSteelsmith Quality: Premium construction with precision engineering and durability focusDual Position Locking: Can be locked in both open and closed positions for operational flexibilityEasy Operation: User-friendly push/pull handle design for effortless engagementRobust Construction: High-grade steel with protective finish for long service lifeApplications:Package handling and processing systemsAssembly line automationCompact manufacturing fixturesSmall parts machining operationsElectronic assembly and testingQuality control inspection stationsPackaging equipment and machineryAutomated sorting systemsConveyor system applicationsLaboratory and testing equipmentTechnical Specifications:Series: Steelsmith HTC Medium DutySize Category: Package size (compact dimensions)Base Type: Flanged mounting with pre-drilled holesAction Type: Straight line push/pull mechanismDuty Rating: Medium duty industrial applicationsConstruction: High-grade steel with protective coatingHandle Operation: Push/pull toggle actionLocking Positions: Dual position capabilityFlanged Base Advantages:Secure Mounting: Multiple bolt holes ensure stable installationEasy Installation: Pre-drilled holes simplify mounting processVersatile Positioning: Can be mounted in various orientationsLoad Distribution: Flanged design distributes mounting loads effectivelyMaintenance Access: Easy access for servicing and adjustmentPackage Size Benefits:Space Efficient: Compact design for tight workspace applicationsCost Effective: Right-sized for package handling applicationsLightweight: Reduced weight for portable and automated systemsPrecision Fit: Optimized dimensions for package-sized workpiecesSystem Integration: Easy integration into existing package handling systems Frequently Asked Question: Q1: What does "package size" mean for Steelsmith HTC clamps?A: Package size refers to compact dimensions specifically designed for handling packages, small parts, and applications where space efficiency is important while maintaining medium-duty clamping performance.Q2: What are the advantages of flanged base mounting?A: Flanged base mounting provides secure installation with multiple bolt holes, easy positioning, stable load distribution, and simplified mounting compared to threaded mounting options.Q3: How does the straight line action work in these clamps?A: The straight line action uses a push/pull toggle mechanism where the handle moves the clamp plungers directly in and out along the clamp's axis, providing predictable and controllable clamping force.Q4: Are these clamps suitable for automated package handling systems?A: Yes, the package size design, flanged base mounting, and reliable straight line action make these clamps ideal for automated package handling and processing systems.Q5: What mounting hardware is required for flanged base clamps?A: Flanged base clamps require appropriate bolts or screws to secure through the pre-drilled holes. Contact Blocktobox for recommended fastener specifications.Q6: Can these clamps handle different package sizes?A: While optimized for package-sized applications, these clamps can accommodate various workpiece sizes within their operating range. Check specifications for exact capacity.Q7: What industries use Steelsmith package size flanged base clamps?A: Common applications include packaging machinery, electronics assembly, small parts manufacturing, quality control systems, and automated sorting equipment.Q8: How do I install flanged base clamps?A: Position the clamp, align the flanged base holes with your mounting surface, and secure with appropriate bolts or screws through the pre-drilled holes in the flange.Q9: What clamping force do these medium duty clamps provide?A: These clamps provide substantial medium-duty clamping force suitable for package handling and small to medium-sized workpieces. Contact Blocktobox for specific force ratings.Q10: Are replacement parts available for Steelsmith flanged base clamps?A: Yes, replacement parts including handles, plungers, springs, and mounting hardware are typically available to ensure long-term serviceability.
-
Steelsmith Steelsmith HTC-Series Heavy Duty-Package Size Clamps, Flanged Base
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith HTC-PS-TRIG Series Clamps
-
Steelsmith PAH 38 TRIG Clamps
-
-
-
Steelsmith Steelsmith VTC Series/Medium Duty Clamps-Straight Base/5000-8000 Series
Vertical Hold Down Action With Additional Locking Mechanism(VTC): In the VTC Series, Toggle Clamps from Steel Smith employ a downward clamping action to secure workpieces, boasting a robust holding capacity of up to 3000 kgs. With a minimum 90 degree opening angle, these clamps facilitate easy loading and unloading of workpieces. The clamping arm options include solid bar, U-shaped, or fixed hole configurations, catering to individual needs. Features Series Details: SF Series: Solid hold-down bar with a fixed guide bush for the spindle assembly. SB Series: 'U' bar arm allows the bolt retainer to be welded at any desired angle. UB Series: 'U' bar arm permits one or more spindles to be moved to any desired position along the arm. Specifications Material and Finish: Material: Steel Finish: Zinc Plated Technical Details: Model No Material Finish Arm Type Base Type Holding Capacity VTC-50125-UB-BS Steel Zinc Plated Adjustable Arm Straight Base 3.40 kN VTC-50125-SF-BS Steel Zinc Plated Spindle Fixed Straight Base 3.40 kN VTC-50125-SB-BS Steel Zinc Plated Solid Arm Straight Base 3.40 kN VTC-85150-UB-BS Steel Zinc Plated Adjustable Arm Straight Base 5.90 kN VTC-85150-SF-BS Steel Zinc Plated Spindle Fixed Straight Base 5.90 kN VTC-85150-SB-BS Steel Zinc Plated Solid Arm Straight Base 5.90 kN Dimensions Model No Handle Opening Bar Opening Weight (Kgs) A1 B1 C D E F G H J K T VTC-50125-UB-BS 120° 72° 0.910 240.5 132 76 25 11 45 8 138 8.5 M12 VTC-50125-SF-BS 120° 72° 0.910 240 133 75 25 11 45 8 138 8.5 M12 VTC-50125-SB-BS 120° 72° 0.910 233 133 75 25 11 45 8 130 8.5 M12 VTC-85150-UB-BS 107° 75° 2.450 358 202.5 116 45 15 76 10 162 8.5 M16 VTC-85150-SF-BS 107° 75° 2.450 355 203.5 116 45 15 76 10 165 8.5 M16 VTC-85150-SB-BS 107° 75° 2.450 338 201.5 116 45 15 76 10 142 8.5 M16
-
Steelsmith Steelsmith H-Series Medium Duty Clamps-Front Mounting Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith VTC Series/Medium Duty Clamps-Flanged Base/2000-4000 Series
Toggle Clamps-Vertical Hold Down Action In the VTC Series, Toggle Clamps from Steel Smith employ a downward clamping action to secure workpieces, boasting a robust holding capacity of up to 3000 kgs. With a minimum 90 degree opening angle, these clamps facilitate easy loading and unloading of workpieces. The clamping arm options include solid bar, U-shaped, or fixed hole configurations, catering to individual needs. Features Series Details: SF Series: Solid hold-down bar with a fixed guide bush for the spindle assembly. SB Series: 'U' bar arm, allowing the bolt retainer to be welded at any desired angle. UB Series: 'U' bar arm enables one or more spindles to be moved into any desired position along the arm. Specifications Material and Finish: Material: Steel or Stainless Steel (304) Finish: Zinc Plated or Electro Polished (for stainless steel models) Technical Details: Model No Material Finish Arm Type Base Type Holding Capacity VTC-1625-UB Steel Zinc Plated Adjustable Arm Flanged Base 0.50 kN VTC-1625-SF Steel Zinc Plated Spindle Fixed Flanged Base 0.20 kN VTC-2535-UB Steel Zinc Plated Adjustable Arm Flanged Base 1.00 kN VTC-2535-SF Steel Zinc Plated Spindle Fixed Flanged Base 0.50 kN VTC-2535-SB Steel Zinc Plated Solid Arm Flanged Base 1.00 kN VTC-1625-UB-SS Stainless Steel (304) Electro Polished Adjustable Arm Flanged Base 0.50 kN VTC-2535-UB-SS Stainless Steel (304) Electro Polished Adjustable Arm Flanged Base 1.00 kN Dimensions Table: Model No Handle Opening Bar Opening Weight (Kgs) A B C D E F G H J K T VTC-1625-UB 101° 60° 0.080 24 25 16 33 23 86 56 31 4.5 M5 VTC-1625-SF 101° 60° 0.080 24 25 16 33 23 86 56 31 4.5 M5 VTC-2535-UB 104° 64° 0.220 27 30 25 38 32 129 75 45 5.5 M6 VTC-2535-SF 104° 64° 0.220 27 30 25 38 32 129 75 45 5.5 M6 VTC-2535-SB 104° 64° 0.220 27 30 25 38 32 129 75 45 5.5 M6 VTC-1625-UB-SS 101° 60° 0.080 24 25 16 33 23 86 56 31 4.5 M5 VTC-2535-UB-SS 104° 64° 0.220 27 30 25 38 32 129 75 45 5.5 M6 Technical Details: Model No Material Finish Arm Type Base Type Holding Capacity VTC-3050-UB Steel Zinc Plated Adjustable Arm Flanged Base 1.50 kN VTC-3670-UB Steel Zinc Plated Adjustable Arm Flanged Base 2.00 kN VTC-3670-SF Steel Zinc Plated Spindle Fixed Flanged Base 2.00 kN VTC-3670-SB Steel Zinc Plated Solid Arm Flanged Base 2.00 kN VTC-4595-UB Steel Zinc Plated Adjustable Arm Flanged Base 3.90 kN VTC-4595-SF Steel Zinc Plated Spindle Fixed Flanged Base 3.90 kN VTC-4595-SB Steel Zinc Plated Solid Arm Flanged Base 3.90 kN VTC-3670-UB-SS Stainless Steel (304) Electro Polished Adjustable Arm Flanged Base 2.00 kN VTC-4595-UB-SS Stainless Steel (304) Electro Polished Adjustable Arm Flanged Base 3.90 kN Dimensions Model No Handle Opening Bar Opening Weight (Kgs) A B C D E F G H J K T VTC-3050-UB 110° 85° 0.350 46.5 145 66 35 46 50 35 115 7.2 M8 VTC-3670-UB 110° 115° 0.410 61.5 180 66 35 58 80 35 152 6.5 M8 VTC-3670-SF 110° 115° 0.410 61.5 180 66 35 58 80 35 152 6.5 M8 VTC-3670-SB 110° 115° 0.410 61.5 180 66 35 58 80 35 152 6.5 M8 VTC-4595-UB 120° 151° 0.820 79 205 86 45 82 105 45 182 8.5 M10 VTC-4595-SF 120° 151° 0.820 79 205 86 45 82 105 45 182 8.5 M10 VTC-4595-SB 120° 151° 0.820 79 205 86 45 82 105 45 182 8.5 M10
-
Steelsmith Steelsmith Pull Action Clamps PAH Series (341,375 Series)
PAH-341-TRIG Pull Action Clamp used to securely close the vent of a Wood Chipping Machine This clamp has an additional locking mechanism as a safety feature PAH-331-TRIG Clamp used for smaller size machines Standard product used by customer for ease of future replacements
-
Armatech Associates Crystal Hardened & Ground V-Blocks With clamps Series AA-171
• V’ Blocks are Hardened & Ground to 55 HRC + 2 HRC. • The top ’V’ and bottom ’V’ are parallel within + 3 micron and it’s squareness to the end faces and height variations to the ’V’ Block in a pair is within + 3 micron. • Supplied with Clamp for holding job. • Hold square & Round work.
-
Steelsmith Steelsmith HTC-Series Medium Duty Clamps - Low Height
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
-
Steelsmith PAH 27 TRIG Clamps
-
Steelsmith Steelsmith PAH TRIG Clamps
PAH-341-TRIG Pull Action Clamp used to securely close the vent of a Wood Chipping Machine This clamp has an additional locking mechanism as a safety feature PAH-331-TRIG Clamp used for smaller size machines Standard product used by customer for ease of future replacements
-
-
Steelsmith Steelsmith Horizontal Hold Down Action H-215 Series Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
-
You have seen 64 out of 64 products
