Enjoy ₹500 Off on your First Purchase
Sign up to get exciting promotion offers to your inbox!
Products
-
Armatech Associates Crystal Hardened & Ground V-Blocks
We are highly engaged in offering Hardened & Ground ''V'' Blocks to our prestigious clients. Features: Grade A- 'V' Blocks are made from high quality tool steel. Hardened to 55 HRC ± 2 HRC and are precision ground. Grade B- 'V' Blocks are made from closed grain cast iron. The top 'V and bottom 'V are parallel and its squareness to the end faces and height variations in the 'V block are controlled in a matched pair. Supplied with clamps for holding job. Perfect alignment in matched pairs.
-
Armatech Associates Crystal Hardened & Ground V-Blocks With Clamp
The 'V’ Block have two 'V’ angles of different sizes to take jobs of various dimention. By means of clamp the work can be held rigidly to the 'V’ Block. The top 'V’ and bottom 'V’ are parallel within ± 3 micron and it's squareness to the end faces and height variation to the 'V Block in a pair is within ± 3 micronIn Built Features: V Blocks are Hardened & Ground to 55 HRC ± 2 HRC. The top V and bottom V are parallel within ± 3 micron and its squareness to the end faces and height variations to the V Block in a pair is within ± 3 micron. Supplied with Clamp for holding job. Hold square and Round work.
-
Armatech Associates Crystal Hardened & Ground V-Blocks With Clamps Series AA-176
• A precision ‘V’ block hardened at 55 HRC 1 2HRC for the most accurate Tool Room Work. • V-Grooves are ground central and parallel to the sides and base there is perfect alignment in matched pairs. • Holds square or round work. Clamp has tapping holes at 45″ and 90°. • Stepped groove construction permits low or high clamp mounting for small or large work up to a 50mm & 35mm square. • Clamps do not project in the sides , permitting block to be used on base, ends or sides. • I Exclusive features gives it extra utility and versatility not found in other types of blocks.
-
Armatech Associates Crystal Heavy Duty Dial Indicator Stand
 This extra heavy and ruggedly made testing stand with fine adjustment is used wherever the highest accuracy is required .  It can be used for inspecting mounted pieces on a bench centre for run out.  The surface of the H-formed base, the column and the extension arm are precision ground.  The column can be moved and clamped in any position on the base with a knurled nut.  The extension arm which can be adjusted in height, moved lengthwise and swiveled is sufficiently rigid that vibrations during the measurement even with the fullest extension, are at a minimum.
-
Armatech Associates Crystal Heavy Duty Surface Gauges
These are very heavy and robust stands. They are used wherever optimumrigidity is demanded. Â The extremely sturdy columns guarantee high-test rigidity. These standshave a novel clamping device for the projection of scriber. Â Heavy duty surface Gauge has simple and rapid setting of the stand andclamps and scriber in any position even at moderate tightening.Â
-
Armatech Associates Crystal Magnetic Base With Fine Adjustment (Two Balls & Socket Joint)
This Crystal Magnetic Dial Stand Base is perfect for any laboratory or research setting. It features a magnetized dial stand that allows for precise, fine adjustments with just a twist. Its dial is easy to grip and can be adjusted quickly, allowing you to measure and test with accuracy and ease. A Powerful magnetic base holds firmly to any steel or cast iron surface horizontally, vertically or up-side down. The dial stand can be locked in any desired position in 360Deg by a central locking mechanism provided on the top of the assembly  There is a clamping hole intended for Dia8mm stem and also there is a dovetail clamp for lever type dial indicatorÂ
-
Armatech Associates Crystal Magnetic Bases
This model has as a heavy magnetic base and the rigid gunmetal fitting clamps making it suitable for use in shop floor environment.  A fine adjustment screw is provided and maximum magnetic performance gives security even on rough surface.  The base and two sides are energized by switching it ON for attachment to flat surfaces and a ‘V’ slot facilitates gripping on curved surfaces.  Universal movement of crossbar is controlled by one screw.
-
Armatech Associates Crystal Magnetic Bases With Fine Adjustments
A powerful Permanent Magnetic Base holds ï¬rmly to any steel oriron surface—horizontally, vertically or up-side down.  This magnetic base comes without ï¬ne adjustment.  ON/OFF knob is provided for ease of operation.
-
Armatech Associates Crystal Magnetic Rack
Crystal brand Permanent Magnetic Racks are useful in tool room, workshops, paint shop, machine shops, assembly, garages, to keep the hand tools such as spanners, screw drivers, calipers, files, cutting tools, etc. In a systematic manner. It helps the user for easy handling & storage. They are available in different lengths. Magnetic Racks are totally protected from rust and corrosion.These racks can be easily mounted.“Crystal†magnetic racks make the best possible use of permanent magnet material in the solution of many lifting and holding problems, as all available magnetic flux from a small number of magnets is concentrated in the two mild steel pole pieces.Details: Sr. No. Cat No. DimensionsL XH X W 1. AA-3161 150 X 25 X 30 mm 2. AA-3162 225 X 25 X 30 mm
-
Armatech Associates Crystal Magnetic Sticks
Features: "CRYSTAL" magnetic sticks are very useful for removing steel particles from blind holes and useful for assembly & maintenance work for removing steel parts lying in oil tanks. "CRYSTAL" magnetic sticks are compact unit embodying powerful 'Alnico' Magnets assembled in stainless steel pots which are designed for lifting applications. Length can be increased by joining extension. Extra lengths are available on request. Specification: Sr. No. Cat. No. Diameter Length mm 1 AA-2229 3 mm 150 2 AA-2220 5 mm 150 3 AA-2221 6 mm 150 4 AA-2222 8 mm 150 5 AA-2223 10 mm 150 6 AA-2224 12 mm 150 7 AA-2225 14 mm 150 8 AA-2226 15 mm 150 9 AA-2227 16 mm 150
-
Armatech Associates Crystal Magnetic Tool Holder
 Designed to hold work magnetically for inspection & layout work, Very Useful For Holding Odd shaped Parts for Grinding.  Accuracy for Flatness, Parallelism and Squarness is within 0.005mm
-
Armatech Associates Crystal Magnetic V-Blocks
• Accuracy for Flatness, squareness & Parallelism within 0.005mm for 2″, 3″, 4â€, 6†& 0.010mm for 8†‘V’ blocks.• The main ’V’ angle & the bottom holding surface are equipped with hardened HSS Blades that ensure extra wear resistance in hardened series.• Uniform & Strong magnetic pull to all three magnetic surfaces that is top, bottom & two ’V’ grooves.• Hardness of ’V’ face 58 HRC + 2 HRC.• 60â€, 108â€, 120†‘V’ angles are also available.• Easy ON-OFF facility.• Used for Grinding, Light milling, Drilling & Inspection of Round & Square jobs.• The magnetic system is shielded from penetration of moisture & cannot be damaged by coolants or other fluids.
-
Armatech Associates Crystal Pot Magnets
Pot Magnets: “CRYSTAL†Pot Magnets are compact units embodying powerful “Alnico†magnets assembled in mild steel pot by aluminum retaining and insulating rings designed for magnetic holding and lifting applications of all sorts. They can be readily inserted into other assemblies and the mild steel pot be easily machined to suit individual requirements. Available in Neodymium Pot Magnet, Hook Magnet, Shallow Pot Magnet, Deep Pot Magnet, Countersunk Magnet and in four sizes. Supplied complete with plated keeper. Special sizes can also be manufactured. Specifications: Sr. No. Cat. No. Diameter(OD) Height(H) Threading Depth of Threading(D) Magnetic Pullkg 1 AA-1921 18 mm 16 mm M 5 5-6mm 1.8 2 AA-1922 22 mm 20 mm M 6 5-6mm 2.8 3 AA-1923 27 mm 25 mm M 6 5-6mm 6.5 Â
-
Armatech Associates Crystal Precision Grinding Sine Vice With Screw
Features: Used for precision measurement, setting of angles, right angle grinding and light machining. Made from high quality alloy steel. Accuracy for squareness, Flatness, & Parallelism is without 0.005mm. Angular accuracy within ±5 seconds. Center distance between rollers is within ±0.005mm. Specification: Sr. no. Cat. No. Size (mm) LxWxH) Opening 'Q' (mm) C.D(mm) Centre Distance 1 AA-6131 150x48x88 0-75 125 2 AA-6132 180x63x98 0-90 150 3 AA-6133 200x73x108 0-100 175
-
Armatech Associates Crystal Roller Bearing V-Blocks
 The Roller Bearing ‘V’ Blocks are accurately assembled and are precision ground in matched pairs.  Four high precision double Z bearings are provided on the top . This facilitates in the inspection of heavy round components. Work pieces don’t get damaged due to bearings.  The base plate of roller bearing ‘V’ block is hardened to 55 HRC i 2 HRC.
-
Armatech Associates Crystal Universal Surface Gauges
The base is made from case — hardened steel, ground on the bottom and at one end.  There is a depression in each side for the thumb and fingers and the groove in the base adapts it for use on cylindrical as well as flat surfaces.  There are two gauge pins frictionally held, which can be pushed down and used against the end of a surface plate on a T- slot for linear work.  The fine adjustment feature makes it possible to obtain quick and accurate settings.  The spindle which passes through rotating head or lower sleeve can be set above or below the base. The hardened and ground scriber can be set at any position on the spindle which in turn can be set at any angle.
-
Insize Insize 1µm Graduation Outside Micrometer
Graduation 0.01mm Ratchet stop Graduations on two sides Carbide measuring faces Meet DIN863-1
-
Insize Insize Block Levels
-
Insize Insize Bore Gage-2322 Series (With Dial Indicator)
 Repeatability:0.003mm Supplied with Dial indicator, range 10mm, graduation:0.01mm Code:2308-10FA Optional accessory: setting ring (code 6312), long handle (code 7351), bore gage setter
-
-
-
Insize Insize Dial Test Indicator Holders
Can be used with test indicators
-
Insize Insize Dial Test Indicators
Insize Dial Test Indicators deliver precision measurement for quality control and machining operations. These instruments feature a sensitive dial mechanism that registers minute variations in part dimensions, making them essential for verifying tolerances and detecting surface irregularities. Built with robust construction to withstand workshop environments, they offer reliable repeatability across production runs. Ideal for tool and die work, inspection stations, and manufacturing setups where accuracy directly impacts product quality. Features: Jewelled bearing Carbide contact point. Two measuring directions. Anti magnetic body. Supplied with two clamps: diameter Ø4mm and 08mm Optional accessory: styli. 2380-08, 2381-08- Graduation:0.01mm,Â
-
Insize Insize Dial Test Indicators-10 Microns
Jewelled bearing Carbide contact point. Two measuring directions. Anti magnetic body. Supplied with two clamps: diameter Ø4mm and 08mm Optional accessory: styli. 2380-08, 2381-08- Graduation:0.01mm,Â
-
Insize Insize Digital Calipers-Long Range-1106 Series
Resolution: 0.01mm/0.0005" Button function: on/off, zero, mm/inch, ABS, data preset Battery CR2032 Made of stainless steel Code Range Accuracy a c d L 1106-501 0-500mm/0-20" ±0.05mm 18 24 100 675 1106-601 0-600mm/0-24" ±0.05mm 18 24 100 770 1106-1002 0-1000mm/0-40" ±0.08mm
-
Insize Insize Digital Depth Gages (Standard Type)-1141 Series
Resolution 0.01mm Data output Made Stainless Steel Â
-
Insize Insize Digital Height Gage With Driving Wheel-1156 Series
DIGITAL HEIGHT GAGES WITH DRIVING WHEEL Non waterproofResolution: 0.01mm/0.0005"Buttons: on/off, zero, mm/inch, preset +, preset -, ABS/INCAutomatic power off, move the digital unit to turn on powerCarbide tipped scriberMade of stainless steelBattery CR2032Data outputSupplied with dust coverWith dial test indicator holderOptional accessory: data output cable (code 7315-22, 7302-22), clamp for protractors (code 2372-CLAMP) 1156-300 and 1156-1000 Scriber (included)Dial test indicator holder (included)Clamp for protractors (optional) Code Range Accuracy Length (L) Width (W) Height (H) a b c h 1156-300 0-300mm/0-12" ±0.03mm 515mm 180mm 55mm 80mm 30mm 35mm 9mm 1156-600 0-600mm/0-24" ±0.05mm 815mm 180mm 55mm 80mm 30mm 35mm 9mm 1156-1000 0-1000mm/0-40" ±0.07mm 1220mm 265mm 70mm 92mm 48mm 40mm 12mm
-
-
Insize Insize Digital Outside Micrometers(Basic Type,Without Data Output)
Resolution 0.001mm/0.00005" Button function: on/off, set, mm/inch, ABS/INC No data output Automatic power off Carbide measuring faces Friction thimble Supplied with spherical anvil Setting standards are included (except 0-25mm/0-1")
-
-
-
Insize Insize Outside Micrometers
Graduation: 0.01mm Carbide measuring faces, ratchet stop Meet DIN863-1 Supplied with setting standards (except 0-25mm)
-
-
-
-
You have seen 144 out of 851 products