The Noga Countersink Tools/Reversible (R) Type utilizes an innovative Reversible design for efficient and precise countersinking.   COUNTERSINK - NG3100 The standard tool for countersinking. Useful For Chamfering Deep Holes NG-3 HANDLE - NG3000 NogaGrip 3 Holds all Blade Holders Spare blades are kept inside back cap. Designed for maximum comfort in your hand.  

Read more less

Countersink Set- Revolving (48032) Revolving type Countersink setIncludes :CS-20 Countersinks with CS-Revolving Handle.Pack Qty : 1Wt : 236 gms  

Read more less

  CS-12 (48120) 2 Flute Countersinks for hole deburring / Chamferring.For hole size from 3 to 12 mm.Pack Qty : 1Wt : 24 gms CS-20 (48200) 2 Flute Countersinks for hole deburring / Chamferring.For hole size from 3 to 19 mm.Pack Qty : 1Wt : 28 gms. CS-30 (48300) 2 Flute Countersinks for hole deburring / Chamferring.For hole size from 3 to 29 mm.Pack Qty : 1Wt : 56 gms. Countersink Set- Revolving (48032) Includes the R-SD Handle (54034), CS-R Revolving Holder (62090) and CS-20 Single Flute Countersink (48201)- For hole sizes from 4 to 19mm ⌀.- Suitable for chamfering/deburring holes on Steel, Aluminium, and Copper. Can also be used on all other metals (hardness <35 HRC) and plastics.- For left & right hand users both.- Wt : 236 gms

Read more less

Noga Heavy Duty Countersinks Patented External contersinks allows the user continuous rotation for fast and accurate chamfering of external shafts.   APPLICATION Holes External Shaft

Read more less

Description Universal Model Turret Sleeve suitable for any make of Turret Tool Locking for Fig. 1 type of Turret sleeve is by the grub of the Turret Block which locks both the Turret Sleeve as well as the Tool. Suitable to hold Cylindrical Shank Tools (Eg. Boring Tool Holder) on Turret of CNC Lathe.   Description Universal Model Turret Sleeve suitable for any make of Turret Tool Locking for Fig. 1 type of Turret sleeve is by the grub of the Turret Block which locks both the Turret Sleeve as well as the Tool. Suitable to hold Cylindrical Shank Tools (Eg. Boring Tool Holder) on Turret of CNC Lathe. Part No. OD ØD mm Bore Ød mm ØD1 mm W mm L1 mm L2 mm L3 mm L4 mm M Thread TSL 16X8 16 8 22 - 5 40 - - M4 TSL 16X10 16 10 22 7 5 40 32 3 - TSL 20X8 20 8 26 - 5 50 - - M5 TSL 20X10 20 10 26 - 5 50 - - M5 TSL 20X12 20 12 26 9 5 50 42 3 - TSL 25X6 25 6 32 - 5 50 - - M5 TSL 25X8 25 8 32 - 5 50 - - M6 TSL 25X10 25 10 32 - 5 50 - - M6 TSL 25X12 25 12 32 - 5 50 - - M6 TSL 25X16 25 16 32 10 5 50 42 3 - TSL 32X6 32 6 38 - 5 60 - - M5 TSL 32X8 32 8 38 - 5 60 - - M6 TSL 32X10 32 10 38 - 5 60 - - M8 TSL 32X12 32 12 38 - 5 60 - - M8 TSL 32X16 32 16 38 10 5 60 52 3 - TSL 32X20 32 20 38 10 5 60 52 3 - TSL 32X25 32 25 38 10 5 60 52 3 - TSL 40X6 40 6 48 - 5 85 - - M5 TSL 40X8 40 8 48 - 5 85 - - M6 TSL 40X10 40 10 48 - 5 85 - - M8 TSL 40X12 40 12 48 - 5 85 - - M8 TSL 40X16 40 16 48 12 5 85 77 2 - TSL 40X20 40 20 48 12 5 85 77 2 - TSL 40X25 40 25 48 12 5 85 77 2 - TSL 40X32 40 32 48 12 5 85 77 2 - TSL 50X10 50 10 60 - 8 92 - - M8 TSL 50X12 50 12 60 - 8 92 - - M8 TSL 50X16 50 16 60 12 8 92 80 4 - TSL 50X20 50 20 60 12 8 92 80 4 - TSL 50X25 50 25 60 12 8 92 80 4 - TSL 50X32 50 32 60 12 8 92 80 4 - TSL 50X40 50 40 60 12 8 92 80 4 -

Read more less

Small sizeTaper upto MT-4 made from Bearing steel EN-31 and through hardened to 58-60 HRc. Big size tapers from MT-5 upwards made from 20MnCr5 and Case Hardened to 58-60 HRc. Broadly confirms to DIN: 807 Precision ground. Tip round within 0.015 mm w.r.t. M. Taper. Application: On CNC Lathes with Live Tail Stock. Draw off Nut to be used to remove/extract the dead center from the Tailstock. Standard Point Angle 60°.   Shank Taper L mm L1 mm L2 mm ØD mm ØD1 mm Ød mm M (Thread) A/F mm S/F mm MT - 2 64.0 48.0 52 18.0 17.780 8 M22 X 1.5 14 15 MT - 3 81.0 57.0 67 24.1 23.825 11 M27 X 1.5 19 21 MT - 4 102.5 72.5 83.5 31.6 31.267 14 M36 X 1.5 27 28 MT - 5 129.5 87.5 107.0 44.7 44.399 18 M48 X 1.5 36 40 MT - 6 182.0 108.0 145.0 63.8 63.348 20 M68 X 1.5 55 55

Read more less

RotoDrive Cranked Countersinks which allows the user to chamfer holes, deep holes and continuous rotation for fast and accurate chamfering.   If a hole is drilled into a work piece, usually a rough edge will appear around the top of the hole. Noga countersinks can remove these rough ridges and put a chamfer between the hole and the surface into which the hole was drilled. Noga Countersinks can also create a deeper recess into a hole, in order to prevent a flat head screw from projecting over the surrounding surface. Noga Countersinks are hand-operated tools normally used for producing a small chamfer, but may also be gripped in a drill press to create deeper recesses. Noga Countersinks consist of three parts: A blade of high speed steel, a holder, and a handle. The Noga Countersinks are used like a screw-driver, pressed onto the hole, and rotated clockwise. However, another method to perform the rotation is offered with our Noga Countersinks Rotodrive system. In this case the blade-holder has the form of a crank, which enables the user to perform continuous rotations. With the Rotodrive system, Noga Countersinks also offers External Countersinks, with which rough edges can be chamfered on the outside of tubes and round bars. For external and internal light chamfering, Noga makes Reversible Countersinks. If a cross hole was drilled into a tube, this tool can be inserted into the hole, then a blade can swivel out to deburr the inside break-through, by rotating the tool clockwise and anticlockwise. Contrary to other Noga countersinks, this tool can create good chamfers also on curved surfaces, because its cutting edges will follow exactly the contour of the hole. As well as on the inside of cross holes, they can also chamfer the outside burrs.   APPLICATION Holes External Shaft

Read more less

Slow Speed revolving Pipe centre Available in Blunt & Pointed 

Read more less

The Turnmax CNC Medium Duty Revolving Center is the perfect choice for medium-duty CNC applications. Its robust design and construction ensure smooth, accurate rotation and maximum durability. With a heavy-duty bearing assembly and heavy-duty threaded spindle, it ensures accuracy during extended use.

Read more less

For High Speed Applications As In CNC Turning Lathes Stub Point, Extended Point & Profiled Point Supplied at Same Price Draw off Nut Provided @ 20% Extra Cost

Read more less

Slow Speed Centres For Conventional & Slow Speed Lathes 90degree Point - 25% Extra Female Point - 25% Extra

Read more less

Tungsten Carbide Tips brazed in front for high wear resistance. Shank made from Alloy Steel 20MnCr5 and case hardened to 50-53 HRc. Precision ground. Tip runout within 0.015 mm w.r.t. M. Taper. Broadly confirms to DIN : 807   Shank Taper L mm L1 mm L2 mm ØD mm ØD1 mm Ød mm C.T. Ød1 mm C.T. Ød2 mm M (Thread) A/F mm MT - 2 64.0 48.0 52.0 18.0 17.780 8 8 11 M22 X 1.5 15 MT - 3 81.0 57.0 66.5 24.1 23.825 11 11 14 M27 X 1.5 21 MT - 4 102.5 72.5 83.0 31.6 31.267 14 11 14 M36 X 1.5 28 MT - 5 129.5 88.0 110.0 44.7 44.399 18 14 18 M48 X 1.5 40 MT - 6 182.0 108.5 145.0 63.8 63.348 18 18 22 M68 X 1.5 56

Read more less

Tungsten Carbide Tip brazed in front for high wear resistance. Shank made from Alloy Steel 20MnCr5 and case hardened for 50-53 HRc. Precision ground. Tip runout within 0.015 mm w.r.t. Taper. Standard Point Angle 60° Broadly confirms to IS : 2534 - 1963 (Equivalent to DIN : 806-807).   Shank Taper L mm L1 mm Ø D mm D1 mm Ø d mm C.T. h1 mm MT - 1 53.5 26.5 12.2 12.065 5 3.20 MT - 2 64.0 36.0 18.0 17.780 8 5.50 MT - 3 81.0 44.0 24.1 23.825 11 7.00 MT - 4 102.5 57.5 31.6 31.267 14 8.90 MT - 5 129.5 70.5 44.7 44.399 18 11.00 MT - 6 182.0 88.0 63.8 63.348 18 11.10

Read more less

Small size Taper upto MT-4 made from Bearing Steel EN-31 and through hardened to 58-60 HRc. Big size tapers from MT-5 upwards made from 20MnCr5 and Case Hardened to 58-60 HRc. Broadly confirms to IS : 2289 - 1976 (Equivalent to DIN: 806-1961 / ISO : 298) Precision ground. Tip runout within 0.015 mm w.r.t. Taper. Standard Point Angle 60° (other Angles like 75° / 90° etc. against request)   Shank Taper L mm L1 mm L2 mm ØD mm D1 mm h mm h1 mm A1 mm B1 mm MT - 1 53.5 26.5 21.5 12.2 12.065 2.0 3.0 5.5 2.5 MT - 2 64.0 36.0 29.0 18.0 17.780 2.6 3.5 8.0 4.0 MT - 3 81.0 44.0 36.0 24.1 23.825 3.5 4.5 9.0 5.0 MT - 4 102.5 57.5 48.0 31.6 31.267 5.2 5.5 11.0 6.0 MT - 5 129.5 70.5 58.5 44.7 44.399 11.7 6.5 14.0 8.0 MT - 6 182.0 88.0 73.0 63.8 63.348 10.1 8.5 17.0 11.0 MT - 7 254 121 - 83.550 83.058 - - - -

Read more less

RotoDrive Cranked Countersinks which allows the user to chamfer holes, deep holes and continuous rotation for fast and accurate chamfering. If a hole is drilled into a work piece, usually a rough edge will appear around the top of the hole. Noga countersinks can remove these rough ridges and put a chamfer between the hole and the surface into which the hole was drilled. Noga Countersinks can also create a deeper recess into a hole, in order to prevent a flat head screw from projecting over the surrounding surface. Noga Countersinks are hand-operated tools normally used for producing a small chamfer, but may also be gripped in a drill press to create deeper recesses. Noga Countersinks consist of three parts: A blade of high speed steel, a holder, and a handle. The Noga Countersinks are used like a screw-driver, pressed onto the hole, and rotated clockwise. However, another method to perform the rotation is offered with our Noga Countersinks Rotodrive system. In this case the blade-holder has the form of a crank, which enables the user to perform continuous rotations. With the Rotodrive system, Noga Countersinks also offers External Countersinks, with which rough edges can be chamfered on the outside of tubes and round bars. For external and internal light chamfering, Noga makes Reversible Countersinks. If a cross hole was drilled into a tube, this tool can be inserted into the hole, then a blade can swivel out to deburr the inside break-through, by rotating the tool clockwise and anticlockwise. Contrary to other Noga countersinks, this tool can create good chamfers also on curved surfaces, because its cutting edges will follow exactly the contour of the hole. As well as on the inside of cross holes, they can also chamfer the outside burrs. APPLICATION Holes External Shaft

Read more less

Introducing Noga patented REVERSIBLE COUNTERSINKS range for working on both back and front sides of holes. APPLICATION Holes Pipe Cross Holes

Read more less

3 Flute, Long Shank Countersinks for hole/slot/corner deburring/ chamfering. For hole size from 3 to 12 mm Pack Qty : 1 Wt : 60 gms

Read more less