Steel-Smith
-
Steelsmith Steelsmith Pull Action Clamp PAV Series
-
Steelsmith Medium Duty Non-Adjustable Latch (27Series)
-
Steelsmith Medium Duty Adjustable Latch
-
-
Steelsmith Steelsmith Pull Action Clamp PA Series
-
Steelsmith Steelsmith Horizontal Hold Down Action- H International Range Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
-
Steelsmith Steelsmith Miniature Clamps - Straight Line Action (HTC-Series)
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith Horizontal Hold Down Action H-227, 237, 245 Series Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith VTC Series/Medium Duty Clamps-Flanged Base/2000-4000 Series
Toggle Clamps-Vertical Hold Down Action In the VTC Series, Toggle Clamps from Steel Smith employ a downward clamping action to secure workpieces, boasting a robust holding capacity of up to 3000 kgs. With a minimum 90 degree opening angle, these clamps facilitate easy loading and unloading of workpieces. The clamping arm options include solid bar, U-shaped, or fixed hole configurations, catering to individual needs. Features Series Details: SF Series: Solid hold-down bar with a fixed guide bush for the spindle assembly. SB Series: 'U' bar arm, allowing the bolt retainer to be welded at any desired angle. UB Series: 'U' bar arm enables one or more spindles to be moved into any desired position along the arm. Specifications Material and Finish: Material: Steel or Stainless Steel (304) Finish: Zinc Plated or Electro Polished (for stainless steel models) Technical Details: Model No Material Finish Arm Type Base Type Holding Capacity VTC-1625-UB Steel Zinc Plated Adjustable Arm Flanged Base 0.50 kN VTC-1625-SF Steel Zinc Plated Spindle Fixed Flanged Base 0.20 kN VTC-2535-UB Steel Zinc Plated Adjustable Arm Flanged Base 1.00 kN VTC-2535-SF Steel Zinc Plated Spindle Fixed Flanged Base 0.50 kN VTC-2535-SB Steel Zinc Plated Solid Arm Flanged Base 1.00 kN VTC-1625-UB-SS Stainless Steel (304) Electro Polished Adjustable Arm Flanged Base 0.50 kN VTC-2535-UB-SS Stainless Steel (304) Electro Polished Adjustable Arm Flanged Base 1.00 kN Dimensions Table: Model No Handle Opening Bar Opening Weight (Kgs) A B C D E F G H J K T VTC-1625-UB 101° 60° 0.080 24 25 16 33 23 86 56 31 4.5 M5 VTC-1625-SF 101° 60° 0.080 24 25 16 33 23 86 56 31 4.5 M5 VTC-2535-UB 104° 64° 0.220 27 30 25 38 32 129 75 45 5.5 M6 VTC-2535-SF 104° 64° 0.220 27 30 25 38 32 129 75 45 5.5 M6 VTC-2535-SB 104° 64° 0.220 27 30 25 38 32 129 75 45 5.5 M6 VTC-1625-UB-SS 101° 60° 0.080 24 25 16 33 23 86 56 31 4.5 M5 VTC-2535-UB-SS 104° 64° 0.220 27 30 25 38 32 129 75 45 5.5 M6 Technical Details: Model No Material Finish Arm Type Base Type Holding Capacity VTC-3050-UB Steel Zinc Plated Adjustable Arm Flanged Base 1.50 kN VTC-3670-UB Steel Zinc Plated Adjustable Arm Flanged Base 2.00 kN VTC-3670-SF Steel Zinc Plated Spindle Fixed Flanged Base 2.00 kN VTC-3670-SB Steel Zinc Plated Solid Arm Flanged Base 2.00 kN VTC-4595-UB Steel Zinc Plated Adjustable Arm Flanged Base 3.90 kN VTC-4595-SF Steel Zinc Plated Spindle Fixed Flanged Base 3.90 kN VTC-4595-SB Steel Zinc Plated Solid Arm Flanged Base 3.90 kN VTC-3670-UB-SS Stainless Steel (304) Electro Polished Adjustable Arm Flanged Base 2.00 kN VTC-4595-UB-SS Stainless Steel (304) Electro Polished Adjustable Arm Flanged Base 3.90 kN Dimensions Model No Handle Opening Bar Opening Weight (Kgs) A B C D E F G H J K T VTC-3050-UB 110° 85° 0.350 46.5 145 66 35 46 50 35 115 7.2 M8 VTC-3670-UB 110° 115° 0.410 61.5 180 66 35 58 80 35 152 6.5 M8 VTC-3670-SF 110° 115° 0.410 61.5 180 66 35 58 80 35 152 6.5 M8 VTC-3670-SB 110° 115° 0.410 61.5 180 66 35 58 80 35 152 6.5 M8 VTC-4595-UB 120° 151° 0.820 79 205 86 45 82 105 45 182 8.5 M10 VTC-4595-SF 120° 151° 0.820 79 205 86 45 82 105 45 182 8.5 M10 VTC-4595-SB 120° 151° 0.820 79 205 86 45 82 105 45 182 8.5 M10
-
Steelsmith Steelsmith Horizontal Hold Down Action H-213, 217 Series Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
-
Steelsmith Steelsmith HTC-Series Medium/Heavy Duty-Package Size Clamps, Flanged Base
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
-
-
Steelsmith Steelsmith Horizontal Hold Down Action H-225 & H-235 Series Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
-
Steelsmith Steelsmith VTC Series/Medium Duty Clamps-Flanged Base/5000-8000 Series
Toggle Clamps-Vertical Hold Down Action In the VTC Series, Toggle Clamps from Steel Smith employ a downward clamping action to secure workpieces, boasting a robust holding capacity of up to 3000 kgs. With a minimum 90 degree opening angle, these clamps facilitate easy loading and unloading of workpieces. The clamping arm options include solid bar, U-shaped, or fixed hole configurations, catering to individual needs. Features Series Details: SF Series: Solid hold-down bar with a fixed guide bush for the spindle assembly. SB Series: 'U' bar arm allows the bolt retainer to be welded at any desired angle. UB Series: 'U' bar arm permits one or more spindles to be moved to any desired position along the arm. Specifications Material and Finish: Material: Steel Finish: Zinc Plated Technical Details: Model No Material Finish Arm Type Base Type Holding Capacity VTC-5040-SF Steel Zinc Plated Spindle Fixed Flanged Base 3.40 kN VTC-50125-UB Steel Zinc Plated Adjustable Arm Flanged Base 3.40 kN VTC-50125-SF Steel Zinc Plated Spindle Fixed Flanged Base 3.40 kN VTC-50125-SB Steel Zinc Plated Solid Arm Flanged Base 3.40 kN VTC-85150-UB Steel Zinc Plated Adjustable Arm Flanged Base 5.90 kN VTC-85150-SF Steel Zinc Plated Spindle Fixed Flanged Base 5.90 kN VTC-85150-SB Steel Zinc Plated Solid Arm Flanged Base 5.90 kN Dimensions Model No Handle Opening Bar Opening Weight (Kgs) A1 B1 C D E F G H J K T VTC-5040-SF 120° 71° 0.750 143 50 50 45 54.2 138 50 113 8.5 M10 VTC-50125-UB 120° 72° 0.880 215 60 50 45 60 130 50 128 8.5 M12 VTC-50125-SF 120° 72° 0.880 215 60 50 45 60 130 50 128 8.5 M12 VTC-50125-SB 120° 72° 0.880 208 60 50 45 60 130 50 128 8.5 M12 VTC-85150-UB 107° 75° 2.510 322 85 72 45 75 162 85 211.5 8.5 M16 VTC-85150-SF 107° 75° 2.510 335 85 72 45 75 165 85 210 8.5 M16 VTC-85150-SB 107° 75° 2.510 303 85 72 45 75 142 85 210 8.5 M16
-
Steelsmith VTC Series/Medium Duty Clamps-Straight Base/2000-4000 Series
Vertical Hold Down Action With Additional Locking Mechanism(VTC): As the name implies clamps of this type hold the work piece with a downward clamping action. These clamps are manufactured with a holding capacity upto 3000kgs. The Clamping Exhibits a minimum of 90 deg opening angle giving full clearance for loading& unloading of workpiece. Clamping arm can be solid bar, U shaped or fixed hole to suit individual requirements. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith H-Series Miniature Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith H-Series Medium Duty Clamps-Flanged Base-2000,3000 Series
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith H-Series Medium Duty Clamps-Flanged Base-4000,5000 Series
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith H-Series Miniature Clamps (205,206 Series) Clamps
Horizontal Hold Down Action (HTC-Series): The holding action in these types of Toggle Clamps is same as VTC-Series clamps. The outstanding characteristic is the low height design. Unlike the handle & the clamping bar of the VTC-Series, these of the H-Series clamps move in opposite direction. The holding capacities range upto 1,000 kgs. The clamping arm can be solid bar, U shaped or fixed hole type. The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
-
-
Steelsmith Steelsmith HTC-Series Medium Duty Clamps
Steelsmith HTC-Series Medium Duty Clamps Professional straight line action toggle clamps with push/pull operation. Fast delivery.Steelsmith HTC-Series Medium Duty Clamps - Professional Straight Line Action Toggle ClampsThe Steelsmith HTC-Series Medium Duty Clamps represent the perfect balance between robust performance and versatile application capability. These professionally engineered straight line action toggle clamps feature Steelsmith's signature quality construction, delivering reliable medium-duty clamping performance for a wide range of industrial and workshop applications.Key Features:Straight Line Action Design: Push/pull toggle clamping mechanism moves plungers directly along the clamp axisEasy Operation: User-friendly push/pull handle design for effortless engagement and releaseDual Position Locking: Can be locked in two positions for enhanced operational flexibilityMedium Duty Rating: Optimized for applications requiring substantial holding force without heavy-duty complexitySteelsmith Quality: Premium construction with attention to precision and durabilityVersatile Mounting: Multiple base configurations for diverse installation requirementsReliable Performance: Consistent clamping pressure for dependable resultsApplications:General manufacturing and assembly operationsWelding fixtures and jigsWoodworking and carpentry projectsMachining workholding systemsAutomotive repair and maintenanceMetal fabrication operationsQuality control and inspection fixturesProduction line applicationsWorkshop and garage useEducational and training facilitiesTechnical Specifications:Series: Steelsmith HTC-SeriesDuty Rating: Medium duty industrial applicationsAction Type: Straight line push/pull mechanismHandle Operation: Push/pull toggle actionLocking Positions: Dual position capabilityConstruction: High-grade steel with protective finishBrand: Steelsmith - trusted industrial clamping solutionsSteelsmith Brand Advantages:Proven Quality: Steelsmith's reputation for reliable industrial hardwarePrecision Engineering: Manufactured to exacting tolerances for consistent performanceDurability Focus: Built to withstand demanding industrial environmentsValue Engineering: Optimal performance-to-cost ratio for medium-duty applicationsTechnical Support: Backed by Steelsmith's technical expertise and supportDesign Benefits:Predictable Clamping: Straight line action provides consistent and controllable forceQuick Setup: Fast engagement and release for improved productivitySpace Efficient: Compact design suitable for various workspace configurationsMaintenance Friendly: Simple mechanism for easy servicing and longevity
-
Steelsmith Steelsmith HTC-Series Medium/Heavy Duty Clamps-Flanged Base
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
Steelsmith Steelsmith Front Mounting Straight Line Action Clamps
Straight Line Action (HTC-Series): The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load rating.(45 kgs- 4,500 kgs) The SF Series have solid hold down bar which has a fixed guide bush at its end for the spindle assembly. The SB Series have a "U" bar arm which the bolt retainer can be welded at any desired angle. The UB Series have a "U" bar arm which enables one or more spindles to be moved into any desired position along the arm.
-
-
-
-
-
-
-
-
You have seen 36 out of 62 products
